round mechanical tubing
"
매끄러운 탄소에 의하여 용접되는 강관 17 - 24 피트 길이 ASTM/ASME A513 유형 5 DOM
Product Name: ASTM / ASME A513 Carbon Steel Welded Tube Type 5 DOM Tube Length 17-24 Feet Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel Tubing, is a
원활한 냉장 철강 파이프
Seamless Cold Drawn Steel Pipe A seamless cold drawn steel pipe is a type of high-precision seamless steel tube manufactured through the cold drawing process. This process involves pulling (drawing) a seamless steel shell (hot-rolled or extruded) through a die and over a mandrel at room temperature to reduce its diameter and wall thickness to precise dimensions. This method produces pipes with superior surface finish, tighter dimensional tolerances, enhanced mechanical
기름/가스 드릴 막대를 위한 38CrMoAl 38H2MUA 38X2МЮА 합금강 이음새가 없는 관
73x8.5 83x9 38Cr2MoAlA 38CrMoAl 38H2MUA 38X2МЮА Alloy steel seamless pipes for oil drill rods. Additional technical requirements for steel grade 38H2MUA pipes Chemical composition, % С Мп Мо Р S Si Сг Аl GOST 4543-75 0,35±0.01 0.30±0.02 0.15± 0.02 ≤ 0.025 ≤0.025 0.20± 0.02 1.35± 0.05 0.70± 0.1 Our tolerance ±0.05 ±0.1 ±0.05 Same Same ±0.1 ±0.2 ±0.2 Mechanical properties: steel yield (N/ mm²) tensile (N/ mm²) elongation % Hardness, HB max 38X2МЮА 420 617 12 250 Size list: OD,
석유 정제 합금강 이음새가 없는 관 6000mm - 12000mm 길이
GOST550-75 10Г2 15Х5М 15X5 10Mn2 25x2 20x2 25x2.5 Alloy Steel tubes steel pipes for Petroleum refining tubes Application:seamless steel tubes for petroleum refining tubes application Normal sizes:25x2.5mm 25x2mm 20x2mm Механические свойства 10Г2 15Х5М 15X5 марка стали Steel grade Времен. сопрот., Tensile Н/мм2 Предел текуч., Yield Н/мм2 Относит. удлин., Elongation % Относит. сужение, reduction % Ударная вязкость Impact KCU, Дж/см2 Твердость по Бринеллю, Hardness НВ, не более
주문 길이 낮은 합금 강관 4130/30CrMo 물자 높은 직진도
Product Name: 4130 / 30CrMo Seamless Cold Drawn Alloy Steel Pipe , Seamless Mechanical Tubing Material:1010, 1020, 1045, 4130, 4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5
유동성 이음새가 없는 냉각 압연 강철 관 6 - 114mm OD 크기 GOST 8734 20# 모형
GOST8734 20# Annealed Seamless Steel Tube for General Purpose Economic Round Tube Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified length
냉각 압연/압연 솔기는 관, 자동 부속을 위한 35Mn2 비계 강관을 용접했습니다
Product Name: 35Mn2 Seamless Alloy Cold Drawn / Cold Rolled Steel Tube Automotive Parts Tubing Material: 35Mn2 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5. Heat
35Mn2/40Mn2 합금강 이음새가 없는 관 자동 부속을 위한 냉각 압연 과정
Product Name: 35Mn2 / 40Mn2 Seamless Alloy Cold Drawn Steel Tube , Automotive Parts Steel Tubing Material: 35Mn2 , 40Mn2 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.
유동성 고신율/경도를 위한 20Cr/40Cr 합금 강철 이음새가 없는 관
GOST8733 10Mn2 / 20Cr / 40Cr Seamless Cold Drawn Alloy Fluid Steel Pipe Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified length/Finished
